[Shr-Devel] 2.6.37.6 as new default kernel for shr-unstable on om-gta0*

[Sebastian Görgen]

Dear JaMa,


you wrote:
> Are you sure it's caused by 2.6.37? did you also reflash new rootfs or
> only changed kernel and opkg upgraded? because lately there were many
> reports of ubifs/jffs2 not working after writting it with dfu-util, I'm
> using nandwrite and both images ubifs/jffs2 are working for me.
> 
> GNUtoo reported that he had working images written with dfu-util only
> after running nand scrub
> http://wiki.openmoko.org/wiki/NAND_bad_blocks#Clearing_BadBlocks

I've tried both with nandwrite and dfu-util. Nandwrite mentioned bad blocks 
but running nand_eraseall and nandtest didn' fix my bad block table.
Even after using nand scrub it fails to boot.
If I exchange kernel image 2.6.37 -> 2.6.34 the freerunner boots up properly 
again.

Regards,

Sebastian